Everything You Need To Know About Glazing Inspection

The frequency of glazing inspections will depend on the type of building and its occupancy. For example, a high-rise office building with many occupants will require more frequent inspections than a single-family home.

During a glazing inspection, the inspector will check the condition of the window frames, the glass, and the hardware. They will also make sure that the windows are properly installed and that they meet all the requirements of the building code.

Importance

A glazing inspection is a visual examination of the installation to check for problems such as cracks, leaks, and gaps. It is important because they help ensure the quality of the installation and avoid potential problems down the road.

This inspection is a vital part of ensuring the safety of both commercial and residential buildings. By regularly inspecting the condition of glazing, property owners can identify and repair any potential hazards before they cause serious damage or injury.

While glazing inspection may seem like a tedious task, it is essential for maintaining the safety of a property. By taking the time to inspect the condition of the glazing, property owners can prevent serious accidents and avoid expensive repairs.

What are the Issues Detected in This Inspection?

During a glazing inspection, there are a few different types of issues that can be detected. Some of the most common issues include:

1. Dirt or Debris on the Glass – The most common type of issue is debris or contamination on the surface of the glass. This can be caused by various things, such as dirt, pollen, or even construction debris. When there is a presence of dirt or debris, not only will it look unpresentable, but it also can hinder important views.
2. Cracks or Chips – Another type of issue that can be detected is a crack or chip in the glass. This is usually caused by something impactful, such as a rock or a piece of hail. Cracks and chips can also be caused by wear and tear over time.
3. Improper Installation – Among the common types of issues in glazing is improper installation. This can be caused by several things, such as incorrect spacing or incorrect sealing. Improper installation can lead to various problems, such as leaks or drafts.
4. Discoloration of the Glass – Glass discoloration is usually caused by dirt, dust, and debris build-up, which can reduce visibility and possibly impair the insulation properties. The discoloration can also be caused by exposure to UV rays and chemical contamination.
5. Warping – If the glass is not correctly parged, it can warp over time due to extreme temperatures, changes in humidity, or incorrect window frame installation. Warping can cause damage to insulation capabilities, as well as negatively affect visibility.

The Process of Glazing Inspection

Glazing inspection is crucial to avoid any potential accidents at a construction site. By following a few simple steps, you can ensure that the process is conducted properly and safely.

Step 1: Wear Proper Safety Gear

First, make sure that all workers are wearing the proper safety gear. This includes gloves, eye protection, and clothing that covers the skin. Wearing the appropriate Personal Protective Equipment (PPE) safeguards you from potentially hazardous materials during the inspection process.

Step 2: Clear the Area

Next, inspect the area where the glazing will be taking place. Make sure there are no hazards present that could cause injury.

Step 3: Inspect and Check the Premises

Once the area is clear, the glazing inspection can begin. Start by checking the condition of the glass. Look for any cracks or damage that could cause the glass to break. If you find any damage, do not proceed with the glazing process.

Step 4: Keep It Secure

Next, check the frame of the window or door. Make sure it is sturdy and secure. If the frame is loose, ensure it is fixed before the glazing process continues.

Step 5: Inspect the Sealant

Finally, inspect the weather-resistant sealant. The sealant should be in good condition and free from any damage so that it can protect the glass from the elements. Once the sealant is in good condition, the glazing process can begin.

These steps should be taken every time a glazing inspection is conducted. This process ensures the safety of all workers, as well as the final product.

What is Included in a Glazing Inspection Report?

A glazing inspection report is typically an in-depth report that includes an analysis of the existing glazing and framing systems, photographs of the building envelope, recommendations for performance upgrades and repairs, and assessment of the existing glazing and framing components, as well as recommendations for replacement and/or retrofitting.

It will also provide recommendations for glass and glazing materials, access and escape, ventilation, and fire safety and assist in calculating the thermal performance of the building. Furthermore, it should also provide health and safety information, such as risk assessments, environmental compliance, and accessibility.

Conduct Effective and Safe Glazing Inspections with SafetyCulture (formerly iAuditor)